Preperation: metal

Unpainted Surfaces: Radiators, garage doors, gates, gutters etc

• Clean the surface down with a mild detergent to remove all traces of surface contamination and ensure the surface is clean and dry
• Remove any traces of rust using a wire brush, abrasive paper, or wet or dry
• Galvanised metal should be cleaned down only. Do not rub down or wire brush galvanised metal work
• An appropriate metal primer should be applied to the metal as soon as possible
• Finish as required

Previously Painted Surfaces: Radiators, garage doors, gates, gutters etc

• Remove all rust if possible by scraping, chipping, wire brushing etc. Scrape off any loose and flaking paint back to a firm edge
• Wash all the existing coatings down using a solution of sugar soap and water or detergent to ensure all surface contamination such as dirt and grease are completely removed. Rub down and dust off
• Prime all bare areas of metal using an appropriate metal primer
• Finish as required